ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

CAT Monitor/O2 Sensor - MIL ON/Codes Stored In Memory|Page 556 > < Crankshaft Position Sensor|Specifications|Page 547
Page 1
background image

Technical Service Bulletin # 98-12-4

Date: 980622

CAT Monitor/O2 Sensor - MIL ON/Codes Stored In Memory

Article No.
98-12-4

06/22/98

^

MALFUNCTION INDICATOR LAMP (MIL) - MIL
ILLUMINATED WITH DIAGNOSTIC TROUBLE
CODES (DTCS) P0136, PO138 AND/OR PO141
STORED IN MEMORY - 2.5L VEHICLES EQUIPPED
WITH CD4E TRANSAXLE

^

LAMP - MALFUNCTION INDICATOR LAMP (MIL)
ILLUMINATED WITH DIAGNOSTIC TROUBLE
CODES (DTCS) P0136, PO138 AND/OR PO141
STORED IN MEMORY - 2.5L VEHICLES EQUIPPED
WITH CD4E TRANSAXLE

FORD:
1996-98 CONTOUR

LINCOLN-MERCURY:
1996-98 MYSTIQUE

ISSUE

The Malfunction Indicator Lamp (MIL) may illuminate and Diagnostic Trouble Codes (DTCs) P0136, P0138 and/or P0141 may be stored in memory.
This may be caused by the rear Catalyst Monitor Sensor (CMS) wiring coming into contact with the link shaft. Over an extended period of time this
continuous contact can lead to chafing on the wire Insulation resulting in damage to the sensor wires.

ACTION

Replace the CMS sensor and re-route the wiring away from any possible contact with the link shaft. The sensor wiring is routed such that it is not
possible for the lead to come into contact with the link shaft. Refer to the following Service Procedure for details.

PART NUMBER

PART NAME

F6CZ-9G444-BA

Cataylst Monitor Sensor (CMS)

W700465-S305

Clip/Bracket

W7OO219-S300

Clip/connector

OTHER APPLICABLE ARTICLES: NONE 

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage And Emissions Warranty Coverage

OPERATION

DESCRIPTION

TIME

981204A

Replace Catalyst Monitor

0.4 Hr.

Sensor (CMS) And
Re-route Wire Harness

DEALER CODING

CONDITION

BASIC PART NO.

CODE

9G444

43

OASIS CODES: 206000, 698298

Service Procedure

This TSB article is for rear CMS (post Cat HEGO - part no. F6CZ-9G444-BA) on V6 CD4E ONLY.

Verify the condition of the CMS wire prior to beginning any repairs.

CAT Monitor/O2 Sensor - MIL ON/Codes Stored In Memory|Page 556 > < Crankshaft Position Sensor|Specifications|Page 547