ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Mainshaft, M/T|Service and Repair|Page 5773 > < M/T - Clash/Grind Shifting into Third Gear|Page 5769

Contour V6-153 2.5L DOHC (1996)

Page 1
background image

Mainshaft: Service and Repair

DISASSEMBLE 
 

Tapered Roller Bearing Removal

1. Remove tapered roller bearing from output shaft, using a suitable press and special tools as shown.
2. Remove reverse gear, needle roller bearing, and upper 5-R synchronizer ring, then disengage snap ring and remove 5-R synchronizer.

Mainshaft, M/T|Service and Repair|Page 5773 > < M/T - Clash/Grind Shifting into Third Gear|Page 5769