Contour V6-153 2.5L DOHC VIN L SFI (1997)
Brake Caliper: Testing and Inspection
^
Visually check disc brake caliper. If caliper housing is leaking, it must be replaced.
^
If a seal is leaking, disc brake caliper must be disassembled and new seals and dust boot installed.
^
If caliper piston is seized in the bore, a new disc brake caliper is required.
^
Inspect locating pin boots in front disc brake caliper anchor plate to make sure they are sealed in groove. Replace damaged boots. Locating pin
boots that are not properly sealed may cause disc brake caliper locating pin to corrode and brakes to drag.
