Contour V6-153 2.5L DOHC VIN L SFI (1997)
Brake Master Cylinder: Flow of Diagnosis
DESCRIPTION - Usually, the first and strongest indicator of anything wrong in the brake system is a feeling through the brake pedal. In diagnosing the
condition of the brake master cylinder, check pedal feel as evidence of a brake concern. Check for brake warning lamp illumination and the brake fluid
level in the brake master cylinder reservoir.
CHECKS
^
When in the brake master cylinder area, check the brake tubes and brake master cylinder mounting. The brake tubes and attaching nuts must be
tight.
^
Tighten the brake tubes at the brake master cylinder to 14-22 Nm (11-17 ft. lbs.).
^
Tighten the brake master cylinder mounting nuts to 21-29 Nm (16-21 ft. lbs.).
^
The brake tube fittings must not show any signs of leakage.
^
Check fluid level in master cylinder. If fluid is extremely low or empty, check for leaks or excessively worn pads.
^
Review Normal/Abnormal Conditions under Procedures before continuing diagnosis or replaceing components. See: Initial Inspection and
Diagnostic Overview