Contour V6-153 2.5L DOHC VIN L SFI (1997)
Camshaft Bearing: Specifications
General
Bearing Inside Diameter: 27.012-26.987 mm (1.063-1.062 inch)
Tightening Specifications
Step 1: With rocker arms installed, tighten cylinder head camshaft journal cap bolts in sequence as shown in several passes to 8-12 Nm (71-106 inch
lbs.).
Step 2: With cylinder head camshaft journal caps installed and camshafts aligned with the thrust caps, install cylinder head thrust caps and tighten
retaining bolts to 8-12 Nm (71-106 inch lbs.).
