Contour V6-153 2.5L DOHC VIN L SFI (1997)
Power Steering Line/Hose: Service and Repair
Pressure Hose
Pressure Hose Fittings
NOTE: If a leak occurs between the tubing and tube nut, replace the hose assembly. If a leak occurs between the tube nut and the pump outlet, replace
the plastic washer.
1. Check fitting to determine whether leak is between tube and tube nut or between tube nut and pump outlet.
CAUTION: DO NOT overtighten. The casting may crack.
2. If leak is between tube nut and pump outlet, check to make sure nut is tightened to 31 Nm (23 ft. lbs.). If leak continues or if leak is between tube
and tube nut, remove line.