Contour V6-153 2.5L DOHC VIN L SFI (1997)
Fuel Pump Relay: Service and Repair
REMOVAL
1. Disconnect battery ground cable.
NOTE: When battery voltage is removed from the Powertrain Control Module (PCM), all learned values will be cleared and reset to
predetermined values. When battery voltage is restored to the PCM, the vehicle may exhibit certain driveability concerns. It will be necessary to
drive the vehicle to allow the PCM to relearn values for optimum driveablilty and performance.
2. Locate the fuel pump relay in the engine compartment power distribution center and remove fuel pump relay.
3. To install, reverse removal procedure.
