Contour V6-153 2.5L DOHC VIN L SFI (1997)
NOTE:
^
Lubricate the manual control lever shaft prior to installation.
^
Verify that the manual control lever shaft assembly can move freely.
17. Install the manual control lever shaft nut. Use a 24 mm socket to tighten the manual control lever shaft nut to 67-81 Nm (50-59 ft. lbs.).
18. Install the park pawl ratcheting spring.
NOTE: Verify that the actuating cam rotates freely.
19. Install the manual control lever assembly and bolt. Finger-tighten the bolt. The bolt will be torqued aver linkage adjustment.
