Contour V6-153 2.5L VIN G (24 Valve) SFI (2000)
Ignition Switch Lock Cylinder: Service and Repair
REMOVAL
1. Remove the steering column lower shroud.
NOTE: Ordering the correct ignition lock cylinder to match existing vehicle keys can he achieved through the Ford/Lincoln Mercury Dealerships.
2. Remove the passive anti-theft system (PATS) transceiver.
1
Remove the retaining screw.
2
Remove the transceiver.
3. Remove the ignition lock cylinder.
1
Turn the key to position I (ACC).
2
Use a thin bladed screwdriver to depress the retainer.
3
Remove the ignition switch lock cylinder.
INSTALLATION
1. To install, reverse the removal procedure.