Contour V6-153 2.5L VIN G (24 Valve) SFI (2000)
Disconnect the left-hand suspension (right-hand side shown).
-
Disconnect the ABS wiring harness bracket from the strut.
7. CAUTION: To avoid to damage halfshaft joints and boots, do not bend the inner halfshaft joint by more than 18 degrees, the outer one
by not more than 45 degrees.
Using the special tools, disconnect the left-hand halfshaft from the hub (right-hand side shown).
Vehicles with manual transaxle
8. CAUTION: To avoid to damage the halfshaft joints and boots, do not bend the inner halfshaft joint by more than 18 degrees, the outer
one by not more than 45 degrees.
CAUTION: Do not damage the oil seal.
NOTE: Only if the intermediate shaft has already been removed.
NOTE: Oil escapes.