Removal and Installation Name Specification Quarter / side panel repair section Removal | -
General remarks - Required disassembly operations: Seat cushion, rear seat backrest, rubber seal - door, lock striker, inner fender and trims.
- Remove carpet and wiring from the working area.
- Cut spare part to size in rocker panel area.
| | -
Quarter / side panel - Preliminary cut locations.
- Separate clinched flange.
| Installation | -
NOTE:Apply two-component metal adhesive immediately prior to installation of the new part. Quarter / side panel - Offset.
- Spot weld backing strips.
- Apply two-component metal adhesive.
| | -
CAUTION:Before installing the quarter / side panel, adhesively bond the damping matting. Quarter / side panel - MIG continuous seam welding.
- In the area of the set edge, weld using MIG intermittent seam.
- Clinch flange evenly.
- Puddle welding.
| | |