Crown Victoria V8-281 4.6L SFI (1998)
BENCH TEST
Use Rotunda Radiator Pressure Tester 014-R1072 or equivalent to perform bench test.
1. Drain all coolant from the heater core.
2. Remove heater core from A/C evaporator housing.
3. Connect the 101 mm (4 inch) test heater water hoses with plug and adapter to the core tubes. Then connect the Rotunda Radiator Pressure Tester
014-R1072 or equivalent to the adapter.
4. Apply 241 kPa (35 psi) of air pressure to the heater core. Submerge the heater core in water.
5. If a leak is observed, service or replace the heater core (as necessary).
6. Install heater core into A/C evaporator housing.