Crown Victoria V8-281 4.6L SFI (1998)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
REMOVAL
1. Remove LH front engine support insulator.
2. Remove bolt retaining oil level indicator tube to cylinder head and remove oil level indicator tube.
INSTALLATION
1. Inspect O-ring, lube with clean Super Premium SAE 5W30 Motor Oil XO-5W30-QSP and replace as needed.
2. Route oil level indicator tube through exhaust manifold and into cylinder block.
3. Fully seat tube into cylinder block and install retaining bolt. Tighten to 8-12 Nm (71-106 inch lbs.).
4. Install LH front engine support insulator.
5. Start engine and check for leaks.