Crown Victoria V8-281 4.6L SFI (1998)
2. If removed, position LH camshaft sprocket spacer and camshaft sprocket on camshaft.
3. Install washer and camshaft sprocket retaining bolt. Do not tighten at this time.
4. If removed, position RH camshaft sprocket spacer and camshaft sprocket on camshaft.
5. Install washer and camshaft sprocket retaining bolt. Do not tighten at this time.
6. If, removed, install LH crankshaft sprocket.
NOTE:
-
Crankshaft sprockets are identical. They may only be installed one way. Refer to the illustration for proper crankshaft sprocket installation.
-
Make sure tapered part of crankshaft sprocket faces away from cylinder block.
Timing Chain Marks
7. Install LH timing chain on camshaft sprocket. Make sure copper link of timing chain lines up with timing mark of camshaft sprocket.
NOTE: If copper links of timing chain are not visible, split both timing chains in half and mark the two opposing links as shown.
8. Install LH timing chain on crankshaft sprocket. Make sure copper link of timing chain lines up with timing mark of crankshaft sprocket.
9. If removed, install RH crankshaft sprocket.
