Crown Victoria V8-281 4.6L SFI (1998)
17. Using Cam Positioning Tool Adapters 303-413 and Cam Positioning Tool 303-380 to align camshaft, tighten camshaft sprocket bolt to 110-130
Nm (82-95 ft. lbs.).
18. Install Tool-4201-C Dial Indicator with Bracketry or equivalent in cylinder 1 spark plug hole. Check that camshaft is at maximum lift for the
intake valve at 114 degrees after top dead center (TDC).
NOTE: If not at maximum lift, loosen camshaft sprocket bolt and repeat Steps 12- 15.
19. Remove Cam Positioning Tool Adapters 303-413, Cam Positioning Tool 303-380 and Crankshaft Positioning Tool 303-445.
20. Install engine front cover and valve covers.
21. Start engine and check for leaks and proper operation.
