Crown Victoria V8-281 4.6L SFI (1998)
Headlamp Switch: Service and Repair
REMOVAL
1. Disconnect battery ground cable.
2. Remove light switch knob from headlamp switch by grasping knob and pulling out.
3. Remove instrument panel finish panel from instrument panel.
4. Disconnect main wiring connectors from headlamp switch.
5. Remove nut retaining headlamp switch to headlamp switch bracket and remove switch.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten switch retaining nut to 3 N.m (26 Lb-In).
