Crown Victoria V8-281 4.6L SFI (1998)
Wheel Bearing: Description and Operation
-
The front wheel bearings are pregreased, sealed and require no scheduled maintenance. The front wheel bearings are preset and cannot be
adjusted. If a bearing is disassembled for any reason, the wheel bearing assembly must be replaced.
-
Each front wheel is bolted to a wheel hub assembly. The wheel bearing is an integral part of the wheel hub assembly and is serviced as a wheel
hub. A front axle wheel hub retainer and washer attach the wheel hub to the front wheel spindle assembly.
-
The front wheel bearings are of a wheel hub unit design and are pregreased, sealed and require no scheduled maintenance.
-
The wheel bearings are preset and cannot be adjusted. If a wheel bearing replacement is required for any service, the wheel hub must be replaced
as an assembly.
-
The wheel bearings cannot be disassembled from the wheel hub and cannot be serviced separately.
-
No individual service seals, roller or races are available.
-
The front axle wheel hub retainer torque of 255-345 Nm (189-254 ft. lbs.) restricts wheel hub.
