Crown Victoria V8-281 4.6L SFI (1998)
Intake Air Temperature Sensor: Service and Repair
NOTE: The Intake Air Temperature sensor (IAT sensor) is located in the engine air cleaner cover. When installing, use care not to damage plastic
locking tabs.
1. Disconnect battery ground cable.
2. Disconnect engine control sensor wiring from intake air temperature sensor.
3. Turn intake air temperature sensor 90 degrees counterclockwise and remove from engine air cleaner cover.
4. Inspect intake air temperature sensor O-ring for damage or deterioration and replace as necessary.
5. To install, reverse removal procedure.
