Crown Victoria V8-281 4.6L SFI (1998)
NOTE: If transmission is being serviced for a contamination-related failure, use a new filter and grommet. The filter may be reused if no
excessive contamination is present.
7. Remove one bolt retaining manual control valve detent lever spring to the main control valve body. Remove manual control valve detent lever
spring.
8. Disconnect transmission shift linkage from manual control lever by removing the nut.
9. Remove two bolts retaining digital Transmission Range (TR) sensor to case. Remove digital transmission range sensor from manual control lever.
10. Remove the EPC solenoid bracket retaining bolt. Remove the EPC solenoid bracket.
NOTE: For clarity, the following illustrations show the main control valve body removed. It is not necessary to remove the main control valve
body for this procedure.
