Crown Victoria V8-281 4.6L SFI (1998)
10. Connect the air suspension height sensor to the watts linkage arm.
11. Install the rear stabilizer bar and the rear stabilizer bar brackets. Tighten the rear stabilizer bar bracket bolts to 21 - 29 Nm (16 - 21 ft. lbs.).
12. Align the index marks and install the driveshaft.
13. Connect the rear stabilizer bar link and bushing to the rear stabilizer bar. Tighten the rear stabilizer bar link nuts to 17 - 23 Nm (13 - 16 ft. lbs.).
