Crown Victoria V8-281 4.6L SFI (1998)
Stabilizer Bushing: Service and Repair
REMOVAL
1. Raise vehicle on hoist.
2. Remove four stabilizer bar bracket nuts and two stabilizer bar brackets.
3. Remove lower suspension arm stabilizer bar insulators from front stabilizer bars.
INSTALLATION
1. Clean front stabilizer bar of dirt and other contaminations.
2. Position lower suspension arm stabilizer bar insulator on front stabilizer bar.
3. Install two stabilizer bar brackets and four stabilizer bar bracket retaining nuts. Tighten nuts to 26-35 Nm (19-26 ft. lbs.).