Crown Victoria V8-281 4.6L SFI (1998)
Level Control Solenoid Valve: Description and Operation
Electronic Level Control Solenoid Valve
WARNING: NEVER ROTATE AN AIR SPRING SOLENOID VALVE TO THE RELEASE SLOT IN THE END CAP FITTING UNTIL ALL
PRESSURIZED AIR HAS ESCAPED FROM THE SPRING TO PREVENT DAMAGE OR INJURY.
-
The air spring solenoid valve allows air to enter and exit the air spring during leveling corrections.
-
The valve is electrically operated and controlled by the control module.
-
The valve has a two-stage pressure relief system similar to a radiator pressure cap.
-
An air spring solenoid retainer is first removed.
-
Use the active command modes on Rotunda New Generation Star (NGS) Tester 007-00500 or equivalent to vent the air spring before
removing solenoid.
