Crown Victoria V8-281 4.6L SFI (1998)
Wheel Cover: Description and Operation
Base Wheel Covers
-
The base wheel covers are stainless steel with integral retainer clips. The cross spoke steel covers are full plastic wheel covers with integral plastic
latches.
-
Both wheel cover latches engage an undercut in the wheel at the safety bead. Use care to line up the cover window which has the indentation (also
identified on the backside of the cover with valve stem logo) with the valve and cap when installing the wheel cover.
-
When installing these wheel covers, do not force or hammer on the face of the wheel cover. They can be installed by hand.
