Crown Victoria V8-281 4.6L SFI (1998)
8. Apply downward pressure on 1-2 accumulator cover using Servo Piston Remover/Replacer 307-251 (T92P-70023-A). Using snap-ring pliers,
remove 1-2 accumulator piston retaining ring.
9. Remove accumulator piston and 1-2 accumulator spring.
NOTE: Carefully note the location of the 1-2 accumulator spring and assemble in the same positions. Some models may use two 1-2 accumulator
springs. The accumulator piston may also vary with applications
INSTALLATION
