Crown Victoria V8-281 4.6L SFI (1998)
7. Position the rear suspension lower arms into the brackets, and install the nuts and the bolts. Tighten the rear suspension lower arm bolts to 127 -
173 Nm (94 - 128 ft. lbs.).
8. Install the rear shock absorber in the shock absorber mounting bracket. Tighten the shock absorber lower nut to 76 - 103 Nm (57 - 75 ft. lbs.).
9. Install the wafts linkage onto the bellcrank stud. Tighten the watts linkage retaining nut to 212 - 288 Nm (157 - 212 ft. lbs.).
CAUTION: Take care not to damage the threads on the bellcrank stud.
