Crown Victoria V8-281 4.6L SFI (1998)
2. Install rear wheel bearing into the housing bore using Axle Tube Bearing Replacer 205-124 (T78P-1225-A).
CAUTION: Installation of rear wheel bearing or inner wheel bearing oil seal assembly without proper tool may result in an early bearing or seal
failure. If inner wheel bearing oil seal becomes cocked in bore during installation, remove it and install a new one.
3. Install the inner wheel bearing oil seal using Axle Tube Seal Replacer 205-123 (T78P-1177-A). Use Premium Long-Life Grease XG-1-C or -K or
equivalent meeting Ford specification ESA-M1C75-B between the lips of the inner wheel bearing oil seal.
4. Install axle shafts.
