Crown Victoria V8-281 4.6L SFI (1998)
4. Remove rear door window glass.
INSTALLATION
1. Insert rear door window glass into rear door between rear door glass outside weatherstrip and inner panel.
2. Position rear door window glass into rear door frame and lower rear door window glass to align with rear door electric window regulator.
3. Install two 1/4-inch rivets using Rotunda Blind Fastener Installation Tool 107-R0600 or equivalent (use of 1/4-20 x 1 inch bolts is optional).
Tighten bolts (if used) to 9-14 N.m (80-124 Lb-In). Do not exceed maximum torque. Equivalent metric fasteners may also be used.
4. Install rear door glass run front lower retainer.
5. Adjust rear door window glass.
6. Install rear door trim panel and watershield.
