Crown Victoria V8-281 4.6L SOHC (1992)
Technical Service Bulletin # 92S43
Date: 920501
Overview of Recall 92S43
TO: Selected Ford Dealers
May, 1992
SUBJECT:
Safety Recall 92S43 - 1992 Crown Victoria, ABS Indicator Light Circuit
AFFECTED VEHICLES
Twenty (20) 1992 model year Ford Crown Victoria sedans having standard analog instrument clusters (non-electronic) and built from April 3, 1991
through May 1, 1991.
REASONS FOR RECALL
The Anti-lock Brake System (ABS) instrument panel indicator lamp wiring harness circuits were not installed in these cars.
Federal Motor Vehicle Safety Standard No. 105, "Hydraulic Brake Systems", requires this lamp to illuminate during ignition switch "on" check of lamp
function and also if an ABS system malfunction occurs during vehicle operation.
To correct this condition, dealers are to modify the 14401 wiring assembly behind the instrument panel, to provide the ABS indicator lamp circuits.
ATTACHMENTS
Attachment I
-
Administrative Information
Attachment II
-
Labor Allowances
-
Parts Ordering Information
Attachment III
-
Technical Information
Attachment I - Administrative Information
OASIS
YOU MUST USE OASIS TO DETERMINE IF A VEHICLE IS ELIGIBLE FOR THIS RECALL.
PLEASE NOTE
CORRECT ALL VEHICLES IN STOCK BEFORE DELIVERY
PROMPTLY CORRECT
Affected vehicles on the enclosed list.
Other eligible vehicles which are brought to your dealership.
DEALER-OWNER CONTACT
Immediately contact any owner whose name is not on the list. Give owner a copy of the Owner Letter.
DISTRICT CONTACT
Advise district office if:
-
an owner cannot be contacted.
-
an owner does not make a service date.
FPSD CONTACT
Talk with your FPSD Service Zone Manager about all matters.
FORM 1863/64
Submit 1864 claims using DWE for all completed vehicles. You may use your original 1863 for your record file copy.
WARRANTY AND POLICY MANUAL
See Section 6.3 pages 5 through 8 of your Warranty and Policy Manual for claims preparation.
Attachment II - Labor and Parts Information
ATTACHMENT II
SAFETY RECALL 92S43
