Crown Victoria V8-281 4.6L SOHC (1992)
Front Door Window Glass: Service and Repair
Front Glass
Rear Glass
Removal
1. Remove door trim panel and watershield. See: Body and Frame/Doors, Hood and Trunk/Doors
2. Loosen glass run retainer retaining screw and position retainer forward.
3. Lower glass to gain access to two glass bracket rivets and remove the center pins from rivets using a drift punch. Using a 1/4-inch diameter drill,
drill out remainder of rivets.
Front Glass
CAUTION:
Do not attempt to pry out the rivets as damage to the glass could result.
NOTE:
Prior to removing the rivet center pins, it is recommended that a suitable block support be placed between the door outer panel and the glass bracket to
stabilize the glass during rivet removal.
4. Remove glass.
Installation
1. Insert glass into door between outer belt weatherstrip and inner panel.
2. Position glass into door frame and lower window to align with regulator bracket.