Crown Victoria V8-4.6L (2009)
18. NOTICE: The transmission support crossmember is a press fit in the transmission support crossmember pocket, it may be necessary to
pry the transmission support crossmember out of the transmission support crossmember pocket. Be careful not to damage the
crossmember. Only the RH side of the transmission support crossmember will need to be lowered in order to gain access to the rear
extension housing.
Lower the RH side of the transmission support crossmember.
19. Remove the transmission insulator bolts.
20. Remove the LH and RH catalyst monitor connector retainers.
21. Remove the extension housing bolts and the extension housing.
22. Remove the extension housing gasket.
