Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Alarm Module: Service and Repair
Module - Passive Anti-Theft System (PATS)
REMOVAL
1. Disconnect the battery ground cable.
CAUTION
^
Prior to removal of module, it is necessary to upload module configuration information to New Generation STAR (NGS) Tester. This
information needs to be downloaded in to the new module once installed.
^
Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the LH instrument panel insulator.
1
Remove the pin-type retainers.
2
Remove the LH instrument panel insulator.
3. Remove the lower steering column cover.
1
Remove the screws.
2. Remove the lower steering column cover.
4. Remove the lower steering column cover reinforcement
1
Remove the screws.
2
Remove the lower steering column cover reinforcement.