Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Front Door Window Glass: Service and Repair
REMOVAL
1. Remove the front door trim panel.
2. Position the watershield out of the way.
1
Remove the speaker.
2
Disconnect the driver door module.
3
Position the watershield out of the way.
3. Remove the bolt.
4. Position the front door glass run front retainer forward.
5. Remove the rivets.
CAUTION: Do not attempt to forcibly remove the rivets as damage to the front door window glass will result.
NOTE:
-
Before removing rivets, it is necessary to place a suitable block support between the front door window channel bracket and the door outer
panel to help stabilize the front door window bracket during rivet removal.
-
Lower the front door window glass to gain access to the two front door window channel bracket rivets.