Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
period of time.
1. Lubricate the following with Ford High Performance DOT 3 Brake Fluid C6AZ-I9542-AB or equivalent DOT 3 fluid meeting Ford specification
ESA-M6C25-A. If DOT 3 is not available, use DOT 4 Brake Fluid meeting Ford specification SAE-J-1704-DOT 4.
-
cylinder bore
-
piston seal
-
rear brake disc piston
-
dust boot
2. Install the piston seal.
3. Install the dust boot.
4. CAUTION: Be careful not to damage or dislodge the piston seal.
Install the rear brake disc piston.
