Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
3. Install the disc brake pad anti-rattle clip.
4. CAUTION: Use care not to damage the bleeder screw or brake disc shield.
Install the disc brake caliper.
1
Install the disc brake caliper.
2
Install the disc brake caliper bolts.
5. Install the wheel and tire assembly.
6. Lower the vehicle.
7. Fill the brake master cylinder reservoir with clean High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting
Ford specification ESA-M6C25-A. If DOT 3 is not available, use DOT 4 Brake Fluid meeting Ford specification SAE-J-1704-DOT 4. Install
brake master cylinder filler cap.
8. NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
Inspect brake operation.