Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Heater Core: Service and Repair
Removal and Installation
REMOVAL
NOTE: If a heater core leak is suspected, the heater core must be leak tested before it is removed from the vehicle.
1. Remove the plenum chamber. See: Heating and Air Conditioning/Heater Air Plenum Chamber/Service and Repair
2. Remove the screws and the heater core cover.
3. Carefully cut the seal above the heater core inlet and outlet tubes and remove the heater core.
INSTALLATION
1. To install, reverse the removal procedure.
