Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
8. NOTE: Make sure to tighten the bolts in two stages.
Tighten the bolts in the sequence shown in two stages.
1
Tighten to 20 Nm (15 ft. lbs.).
2
Tighten an additional 60 degrees.
9. NOTE: The front lower hole in the power steering pump is not used.
Position the power steering pump and install the bolts.
10. Install the oil pan drain plug.
11. Lower the vehicle.
12. Install the valve covers.
13. Install the water pump.
14. Connect the battery ground cable.
15. Fill the engine with oil.
Use Ford Super Premium SAE 5W30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G.