Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
4.
Remove the Plastic Key chime warning switch by prying upward on the plastic retainer, while sliding the switch away from the key insertion end
(Figure 1). Refer to the appropriate model Workshop Manual, Key-in-ignition warning switch removal and installation section located in Section
413 if additional detail is required.
5.
Install a new Key-In-Ignition warning chime switch XL2Z-11A127-AB and reinstall lock cylinder.
6.
Verify proper function of the Ignition Switch Lock Cylinder and Key-In-Ignition warning chime switch.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage And Emissions Warranty Coverage
OPERATION
DESCRIPTION
TIME
012113A
Replace The
0.3 Hr.
Key-In-Ignition Warning
Chime Switch
DEALER CODING
CONDITION
BASIC PART NO.
CODE
11A127
42
OASIS CODES: 102000, 112000, 202000, 203000, 204000, 204200, 205000, 206000, 207000, 208000, 208999, 301000, 302000, 497000, 504000,
601300, 603300, 698298