ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Special Tools Used While Performing Procedures|Page 1244 > < Special Tools Used While Performing Procedures|Page 1242
Page 7
background image

18. Perform the fuel line venting procedure.

19. Remove the Manual Override Tool from the fuel tank solenoid valve.

20. Install the fuel tank solenoid manual lock-down valve.

21. Turn in the manual lock-down valve jackscrew on the fuel tank solenoid valve.
22. Repeat the procedure until all affected tanks are vented.

Solenoid Valves - Stuck Open

1. Connect the Grounding Cable to the back side of the fuel fill valve at the fuel line connection.

NOTE
^

Solenoid diagnostics must be completed on all tank solenoid valves prior to venting.

^

Vent the individual fuel tanks that the fuel tank solenoid valves(s)) were identified as stuck open as necessary. Disconnect the electrical

Special Tools Used While Performing Procedures|Page 1244 > < Special Tools Used While Performing Procedures|Page 1242