Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
3. Disconnect the A/C cycling switch wire harness connector.
4. Remove the A/C cycling switch.
5. Disconnect the evaporator to compressor suction line from the suction accumulator/drier.
6. Disconnect and remove the evaporator to compressor suction line from the A/C manifold and tube assembly.
INSTALLATION
1. To install, reverse the removal procedure.
-
Lubricate the O-ring seal with PAG compressor oil YN-12-C F7AZ-19589-DA or equivalent meeting Ford specification WSH-M1C231-B.
