Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
13. Remove the fuel tank solenoid manual lock-down valve.
14. Install the Manual Override Tool into the fuel tank solenoid of the tank to be vented.
WARNING: MAKE SURE THE JACKSCREW IN THE MANUAL OVERRIDE TOOL IS RETRACTED FULLY
(COUNTERCLOCKWISE) PRIOR TO INSTALLATION INTO THE FUEL TANK SOLENOID VALVE. INSTALLATION OF THE
MANUAL OVERRIDE TOOL IN THE VENTING POSITION WILL CAUSE NATURAL GAS TO BE IMMEDIATELY RELEASED
WHICH MAY RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE.
CAUTION: The solenoid valve must be discarded after these procedures as the use of the Manual Override Tool will destroy the solenoid valve.
15. Turn in the Manual Override Tool jackscrew until fuel flows.
16. Vent the fuel tank until the fuel flow stops.
17. Close the manual backflow valve on the fuel filler valve when the tank contents have been vented.
