Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Fuel Injector Wiring Harness: Service and Repair
REMOVAL
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
1. Position the power steering pump out of the way.
2. Remove the air cleaner outlet tube.
3. Disconnect the battery ground cable.
4. Remove the mounting arm and pivot shaft.
5. Disconnect the:
^
Idle Air Control (IAC) valve.
^
Throttle Position (TP) sensor.
6. Disconnect the eight ignition coils.
7. Disconnect the eight fuel injector electrical connectors.
