Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Fuel Filler Hose: Service and Repair
Fuel Filler Valve Filter
Filter Remover/Installer Tool
Special Tool(s)
REMOVAL
1. Remove the fuel filler valve.
2. Position the fuel filler valve in a vise.
3. Remove the fitting from the fuel filler valve.
4. Using the Filter Remover/Installer Tool 134-OO115 (part of NGV pressure and venting kit 134-00114), turn the fuel filler valve filter
counterclockwise to remove.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: After installation is complete, perform the Fuel System Leak Test procedure.