ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service and Repair > < Vacuum Reservoir HVAC|Service and Repair
Page 1
background image

Air Bag(s) Arming and Disarming: Service Precautions

WARNING:  To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing
or replacing any front or side air bag Supplemental Restraint System (SRS) components and before servicing, replacing, adjusting or
striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood
latches.

The side air bag sensors are located at or near the base of the B-pillar.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).

Air Bag(s) Arming and Disarming|Service and Repair > < Vacuum Reservoir HVAC|Service and Repair