Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
1. Follow the removal procedure in reverse order.
WARNING:
-
The air bag Electronic Crash Sensor (ECS) orientation is critical for correct system operation. If a vehicle equipped with an air bag
Supplemental Restraint System (SRS) has been involved in a collision in which the right cowl A-pillar area has been damaged, inspect
the mounting and bracket for deformation. If damaged, the (ECS) must be replaced whether or not the air bags have deployed. In
addition, make sure the area of the (ECS) mounting is restored to its original condition.
-
If installing a new air bag module, always install a new air bag electronic crash sensor (ECS) module.
-
The tightening torque of the air bag electronic crash sensor (ECS) module bracket retaining screws is critical for correct system
operation.
NOTE:
-
Make sure to tighten the retaining bolts to specification.
-
A repair is made by installing a new part only. If the new part does not correct the condition, install the original part and perform the diagnostic
procedure again.
2. Prove out the air bag system.
