Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
10. Apply a liberal amount of Multi-Purpose Grease DOAZ-19584-AA or equivalent meeting Ford specifications ESB-MlC93-B and ESR-M1C159-A
to the seal lip and the top surface of the power steering gear input shaft seal.
11. Using the special tool, install the power steering gear input shaft dust seal.
^
The dished or rubber side must face away from the valve housing.
12. Mount the valve housing in the special tool.
13. Install the power steering gear input shaft and control into the valve housing.
