Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
parts.
1. Mark the rear suspension shock absorber relative to the protective sleeve with the vehicle in a static, level ground position (curb height).
2. Raise and support the vehicle.
3. Use the special tool 014-0094 or equivalent to support the rear axle.
4. CAUTION: Do not use excessive force when removing the pivot bolt and flag nut on the right upper suspension arm to axle bracket.
Damage to the brake line can occur.
Remove and discard the rear suspension upper arm pivot bolt and nut from the axle bracket.
5. Remove and discard the rear suspension upper arm pivot bolt and nut from the frame bracket. Remove the rear suspension upper arm.
Installation
1. NOTE: The rear suspension upper arm bolts must be tightened with the vehicle at curb height.
