Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Spindle: Service and Repair
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can
result in major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not
use a replacement part of lesser quality or substitute design. Torque values must be used during reassembly to ensure proper retention of
these parts.
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake disc.
4. Remove the cotter pin and nut. Discard the cotter pin.
5. Using the special tool, disconnect the tie-rod end from the front wheel spindle.
6. CAUTION: Do not remove the lower ball joint nut at this time. The nut will retain the lower ball joint into the wheel spindle, preventing
the spring from flying out and causing personal injury or damage to the vehicle.
