Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
2. Inflate the air springs.
Without Air Suspension
Rear Suspension
Removal
CAUTION: Suspension fasteners are critical parts because they affect the performance of vital components and their failure can result in
major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a
replacement part of lesser quality or substitute design. Torque values must be used during reassembly to ensure proper retention of these
parts.
1. Raise and support the vehicle.
2. Use the special tool 014-0094 or equivalent to support the rear axle.
3. Remove both stabilizer bar link lower retaining nuts and bushings.
4. Remove both stabilizer bar link upper retaining nuts and bushings. Remove the links.