Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Technical Service Bulletin # 02-13-6
Date: 020708
Stoplamps/Shift Interlock - Inoperative
Article No.
02-13-6
07/08/02
^
BRAKES - STOPLAMPS INOPERATIVE - SERVICE
REPAIR KIT FOR BRAKE PEDAL POSITION
SWITCH WIRING CONNECTOR
^
ELECTRICAL - TRANSMISSION SHIFT INTERLOCK
INOPERATIVE - SERVICE REPAIR KIT FOR BRAKE
PEDAL POSITION SWITCH WIRING CONNECTOR
FORD:
1998-2002 CROWN VICTORIA
LINCOLN:
1998-2002 TOWN CAR
MERCURY:
1998-2002 GRAND MARQUIS
ISSUE
The Brake Shift Interlock may be inoperative on some vehicles, not allowing the operator to move the shift lever from the Park position. Stop Lamp
operation may also be aftected. This may be caused by a deformed Brake Pedal Position Switch electrical connector.
ACTION
Restore Brake Pedal Position Switch operation by installing an updated electrical connector and pigtail.
Refer to the following Service procedure for details.
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
021306A
Replace Brake Pedal
0.4 Hr.
Position Switch Electrical
Connector
DEALER CODING
CONDITION
BASIC PART NO.
CODE
14A005
01
OASIS CODES: 201000, 201200, 203000, 203200, 503300
Service Procedure
1.
Verify the condition.
2.
Remove LH instrument panel insulator. Refer to Workshop Manual Section 501-05.