Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
7. Using the special tool remove the pinion bearing.
NOTE: Do not remove the pinion bearing cups from the carrier casting unless the cups are damaged.
8. Remove the outer differential bearing cup with the special tools.
9. Remove the inner differential bearing cup with the special tools.
Installation
1. Position the special tools and the inner and outer bearing cups in their respective bores.
1. After placing the inner and outer bearing cups in their bores, place the special tool on the inner pinion bearing cup.
2. Place the special tool on the outer pinion bearing cup.
3. Install the special tool into the replacer tools.
